After all the changes and rewiring, the engine runs again. I’ve got a few leaks to fix and the engine is producing some smoke as it burns off surface residue. The silicone exhaust wrap spray is curing which is causing most of the smoke in the video. I warmed up the engine to about 160 degrees before shutting it off. I think it’s still running very rich. There is a strange whistle coming from the intake that varies by rpm. It might be coming from air passing through the idle valve which is currently disconnected while I check timing and … Continue reading Update 5/24/21

Replaced starter with a remanufactured unit.Did more clean up of MS3-Pro fuel injection wiring.Installed 80mm throttle body.With new cold air intake, I removed the MAF sensor housing and converted fuel injection to Speed Density.Replaced external fuel pump with in-tank unit.Replaced all fuel hoses, reducing # of connections by 50%.Wired up O2 sensor heaters for quicker transition to Closed Loop.Hooked up vacuum brake booster. The changeover flap diaphragms and hoses are torn and need replacement. New parts on order. I found a set of valve covers that were professionally coated with a red crackle finish. I’m keeping those aside for when … Continue reading Update 5/10/21