4/10/12 – I welded the brackets and hinge points to install the tilt front end. 9/6/11 – I stripped all the wood and polyurethane foam off the underside of the front body clip and I’m reinforcing the body with fiberglass mat.  There is some distortion in the body clip resulting from the heat produced by curing of the fiberglass mat so I see a lot of sanding a filling in my future.  I cut the wheel openings so that I can drop the body clip over the front frame for fitting.  I’ll add updated pictures with my next post. 8/28/11 – Last week I … Continue reading Updates 9/6/11